2" x 2" In ground post - Stainless Steel

• 100% Rust-Free — Thick stainless steel construction. Cannot rust under any conditions.
• Includes In-Ground Extension — A separate stainless steel extension sleeve sets in concrete below grade, keeping the main post fully above ground.
• Brushed Finish — UV-resistant, matches all Vsons mailboxes.
• USPS Compliant — Engineered to position your mailbox at the required 41–45″ height.
• Mailbox Hardware Included — Mounting bolts for your Vsons mailbox are included.
• Made in North America

The 2×2 profile is the most compact post in the Vsons lineup — clean lines, minimal footprint, ideal for modern residential and HOA installs where a low-profile support is preferred.

USPS height note: The in-ground extension sets in concrete while the main post sits fully above grade, positioning the bottom of your mailbox opening at 41–45″ above road surface per USPS installation requirements.

1. Dig a hole approximately 12–14″ deep at your desired location, 6–8″ back from the curb.
2. Set the included in-ground extension in the hole and pour concrete around it. Use a level to ensure it is plumb.
3. Allow concrete to cure fully (minimum 24 hours).
4. Slide the main post onto the extension and secure it in place.
5. Attach your Vsons Design mailbox using the included mounting hardware.
6. Verify that the bottom of the mailbox opening sits 41–45″ above road surface per USPS guidelines.

Compatible mailboxes: Designed for Vsons Anthony, Jeremy, Eden B, and Era B models. For third-party mailboxes, use appropriate hardware for your application.

Wood post alternative: If you prefer a standard 4×4 wood post, use the Vsons wood post bracket adapter instead.

The post, in-ground extension, and mounting plate are all made from premium stainless steel with a brushed finish. Stainless steel needs no paint or coating, so there is nothing to chip, peel, or fade over time.

Care: Wipe down occasionally with mild soap and water, then rinse and dry with a soft cloth, following the direction of the brushed grain. Avoid steel wool, abrasive pads, and chlorine-based cleaners, which can scratch or discolour the surface.

What mailboxes is this post compatible with?
The 2×2 stainless steel post is compatible with all Vsons Design post-mount mailboxes: Anthony, Jeremy, Eden B, and Era B. Mounting hardware for the mailbox is included with the post.

How does the in-ground extension work?
The post ships with a separate stainless steel extension piece that sets into concrete below grade. The main post slides onto the extension above ground, so the visible portion of the post is never buried or exposed to soil or moisture underground.

Does this post come with concrete?
No. Concrete is not included. Standard bagged concrete mix (available at any home improvement store) works well for this installation. One 50 lb bag is typically sufficient.

What is the difference between the 2×2 and the 4×4 post?
Profile and visual weight. The 2×2 post has a slim, minimal profile — ideal for homes where a compact support looks most intentional. The 4×4 post is heavier and more substantial, better suited for larger mailboxes or homeowners who prefer a more prominent post. Both are made from the same premium stainless steel.

Can I install this post without concrete — just packed dirt?
We don't recommend it. Packed dirt does not provide the lateral stability needed for a clean, long-term install. Concrete keeps the extension plumb and prevents seasonal frost-heave movement. The installation takes about 30 minutes and the concrete sets overnight.